Page 1 of 1
Bumper Overriders
Posted: Thu Mar 12, 2026 22:13
by Hawaiis0
I have got young lad working on 3D printing some overriders. They are coming along but need work on the radii.
The current colour is just spare filament and will be done in black.
Re: Bumper Overriders
Posted: Thu Mar 12, 2026 23:45
by Alan_M
Nice.
Is it just a shell that will need some foam or similar added to the inside as per the originals?
Re: Bumper Overriders
Posted: Fri Mar 13, 2026 14:56
by Hawaiis0
Yes just a shell with a lattice and 2 bosses to bolt into.
Re: Bumper Overriders
Posted: Fri Mar 13, 2026 14:57
by Hawaiis0
I didnt think they were available hence the play, however, they are on SJs for £60 each.
Re: Bumper Overriders
Posted: Fri Mar 13, 2026 19:55
by Zag
Easy thing to repair.
Mine were massively distorted and the mounting points were rusted out. Made a couple of mounting plates with protruding bolts then dug the old filler out from behind the overrider skin. Used builders expanding foam to fill the void and set the mounting points.
Trying to dig out the pre, during and post pics.