Rear Spring

Any special request go here.

Moderator: Board Moderators

Post Reply
ianhateswork
Junior Poster
Posts: 73
Joined: Wed Feb 01, 2017 10:17
Model: se
Colour: red
Year: 1991
Location: manchester

Rear Spring

Post by ianhateswork »

Hello.
Does anyone have an old pair of rear spring for an excel they would sell, softer the better.
My car went above its ride height due to dieting. I had the old springs compressed 20mm and retempered , but its not worked and now sits at 150mm.
I thought it was worth a punt, but i may have to speak to someone who know what they are doing.
thanks
ian.

User avatar
bash
Senior Poster
Posts: 2292
Joined: Thu Nov 03, 2005 15:34
Model: Se, V8
Colour: white
Year: 1986
Location: Doncaster
Contact:

Re: Rear Spring

Post by bash »

Spring rates depend on the number of coils, thier diameter and thickness, my understanding is that one of these factors would need modifying to change thier characteristics. I would agree, you need a specialist spring company to sort you out.
Sorry, but I havnt got any spares though.
Bash
Two things are infinite: the universe and human stupidity; and I'm not sure about the universe.

Pete Boole
Senior Poster
Posts: 3857
Joined: Tue Apr 04, 2006 21:28
Model: Elite
Colour: Monaco White
Year: 1974
Location: Nottingham

Re: Rear Spring

Post by Pete Boole »

I used Springcoil in Sheffield when I wanted springs of a certain spec. Not too expensive and very knowledgeable.

Pete

ianhateswork
Junior Poster
Posts: 73
Joined: Wed Feb 01, 2017 10:17
Model: se
Colour: red
Year: 1991
Location: manchester

Re: Rear Spring

Post by ianhateswork »

Just been looking at a spring calculator and it seems that the spring rate is the same even though they are 11.5 inch.
Was not expecting that, I may have to give them a call.
ian

User avatar
Hawaiis0
Senior Poster
Posts: 4358
Joined: Sun Jun 30, 2013 18:39
Model: Excel SA (No 3); Elite 504
Colour: BRG; Dirty White
Year: 1986
Location: West Oxfordshire

Re: Rear Spring

Post by Hawaiis0 »

LB have some new Eibach springs . They have removed a coil over the standard length. Might help you .
Nothing is fool proof. Fools are clever!

User avatar
shaunw
Senior Poster
Posts: 1353
Joined: Sat Jul 10, 2010 19:19
Model: Esprit GT3
Colour: CALYPSO
Location: Hants

Re: Rear Spring

Post by shaunw »

I have a pair or Avo coilover springs and shocks that I am looking to sell. Fully adjustable ride hight. They only have about 2000 miles on them. I've gone back standard springs and shocks and was expecting an improvement in ride quality but actually they feel very similar :?

Shaun

User avatar
DavidOliver
Senior Poster
Posts: 714
Joined: Fri Nov 07, 2014 11:18
Model: Excel
Colour: Calypso Red
Year: 1985
Location: Majadahonda Madrid Spain

Re: Rear Spring

Post by DavidOliver »

I am not sure whether you want to change ride height or spring rate (stiffness) nor why you want to do this.
If you install shock absorbers with adjustable spring platform, you can lower the ride height and the spring rate is unchanged. However there may be a limit, as an example the Protech rear shock absorbers at normal ride height have a limited amount of thread below the spring platform to lower the ride height by any significant amount.
As an alternative, and to increase spring rate some people cut one spiral off the spring which also lowers ride height.
The suspensions on the Excel are one of the cars excellent features and any change is unlikely to improve the ride for normal use.
The suspensions are a complex unit and the spring is only one part, shock absorbers play a very important function, and a change in ride height affects the suspension geometry of wheel attitude to the road.

Dave the cog.

User avatar
bash
Senior Poster
Posts: 2292
Joined: Thu Nov 03, 2005 15:34
Model: Se, V8
Colour: white
Year: 1986
Location: Doncaster
Contact:

Re: Rear Spring

Post by bash »

Cutting one coil out will drop it but will increase its rate. Id use the spring company in sheffield that pete mentioned.

Bash
Two things are infinite: the universe and human stupidity; and I'm not sure about the universe.

Post Reply