Rear seat belt brackets - SS
Moderator: Board Moderators
- Hawaiis0
- Senior Poster
- Posts: 4166
- Joined: Sun Jun 30, 2013 18:39
- Model: Excel SA (No 3); Elite 504
- Colour: BRG; Dirty White
- Year: 1986
- Location: West Oxfordshire
Rear seat belt brackets - SS
I have had a small batch of Stainless Steel rear seat belt brackets fabricated. Profits will go to club funds. Havent picked them up yet so will keep informed. Will be around £25. Hope to have them on the NEC stand next month.
Nothing is fool proof. Fools are clever!
-
- Senior Poster
- Posts: 3733
- Joined: Tue Apr 04, 2006 21:28
- Model: Elite
- Colour: Monaco White
- Year: 1974
- Location: Nottingham
Re: Rear seat belt brackets - SS
Excellent! A lot of these have corroded to dust.
Pete
Pete
- Hawaiis0
- Senior Poster
- Posts: 4166
- Joined: Sun Jun 30, 2013 18:39
- Model: Excel SA (No 3); Elite 504
- Colour: BRG; Dirty White
- Year: 1986
- Location: West Oxfordshire
- MetBlue
- Senior Poster
- Posts: 1445
- Joined: Sat Mar 24, 2018 21:00
- Model: Elite 74 & Excel 92 (SEish))
- Colour: Metalic Blue
- Year: 1974
- Location: Northampton
Re: Rear seat belt brackets - SS
Just the bottom bracket Stu, or top as well?
Just looked closer at the picture - Top bracket . Put me down for a pair.
Tony
Just looked closer at the picture - Top bracket . Put me down for a pair.
Tony
What goes together.... Must come apart.
- Alan_M
- Senior Poster
- Posts: 1146
- Joined: Sat Aug 12, 2017 01:17
- Model: Excel SE, Excel SA, Elan SE
- Colour: Red, red, white
- Location: South Wales
Re: Rear seat belt brackets - SS
I’m sure I’ll need a set at some time, so put me down for a set.
Not actually checked any of mine, so might need some sooner that sometime
Not actually checked any of mine, so might need some sooner that sometime
- Hawaiis0
- Senior Poster
- Posts: 4166
- Joined: Sun Jun 30, 2013 18:39
- Model: Excel SA (No 3); Elite 504
- Colour: BRG; Dirty White
- Year: 1986
- Location: West Oxfordshire
Re: Rear seat belt brackets - SS
This is just the external inner rear wheel arch bracket. The internal bracket will be like new still.
They are listed on SJs in mild steel still, at £30 each. But you'll be paying less for Stainless and supporting our club.
Following is the first dibs list pending quality control approval. 20 will be available. 10 left and 10 right.
Stu (pair)
Tony (pair)
Alan (pair)
They are listed on SJs in mild steel still, at £30 each. But you'll be paying less for Stainless and supporting our club.
Following is the first dibs list pending quality control approval. 20 will be available. 10 left and 10 right.
Stu (pair)
Tony (pair)
Alan (pair)
Nothing is fool proof. Fools are clever!
- Tanz
- Senior Poster
- Posts: 2090
- Joined: Thu May 03, 2007 22:05
- Model: SE
- Colour: Calypso Red
- Year: 1988
- Location: Wolverhampton
Re: Rear seat belt brackets - SS
I have replaced the lower rear seat belt montings. This one
So where is this other one to be found? I thought I had rusty seat belt mounts covered
So where is this other one to be found? I thought I had rusty seat belt mounts covered
Cheers, Phil
Never take life seriously, nobody gets out alive anyway!
Never take life seriously, nobody gets out alive anyway!
- Alan_M
- Senior Poster
- Posts: 1146
- Joined: Sat Aug 12, 2017 01:17
- Model: Excel SE, Excel SA, Elan SE
- Colour: Red, red, white
- Location: South Wales
Re: Rear seat belt brackets - SS
Place head under wheel arch and look up and forwardish.
It’s the one that the bracket the rear seatbelt reel mounts to then bolts through to this bracket under the “parcel” shelf.
A question for Stu - the part number for these appear to have changed at VIN 89 D 2457. Which version is this, and are they backwards/forewords compatible?
- Hawaiis0
- Senior Poster
- Posts: 4166
- Joined: Sun Jun 30, 2013 18:39
- Model: Excel SA (No 3); Elite 504
- Colour: BRG; Dirty White
- Year: 1986
- Location: West Oxfordshire
Re: Rear seat belt brackets - SS
These are B's and according to the PIG :
<revision letter> indicates which version of the part was used. Later revisions should be OK to replace earlier, but not vice-versa
However, being reproductions may have nuances.
Nothing is fool proof. Fools are clever!
- Tanz
- Senior Poster
- Posts: 2090
- Joined: Thu May 03, 2007 22:05
- Model: SE
- Colour: Calypso Red
- Year: 1988
- Location: Wolverhampton
Re: Rear seat belt brackets - SS
Thanks Alan for the reply.
Stu - please pt me down for a pair and thanks for doing this.
Stu - please pt me down for a pair and thanks for doing this.
Cheers, Phil
Never take life seriously, nobody gets out alive anyway!
Never take life seriously, nobody gets out alive anyway!
- Hawaiis0
- Senior Poster
- Posts: 4166
- Joined: Sun Jun 30, 2013 18:39
- Model: Excel SA (No 3); Elite 504
- Colour: BRG; Dirty White
- Year: 1986
- Location: West Oxfordshire
Re: Rear seat belt brackets - SS
CORRECTION
They are listed on SJs in CORRECTION Stainless Steel, at £35 each. But you'll be paying less and supporting our club.
Following is the first dibs list pending quality control approval. 20 will be available. 10 left and 10 right.
Stu (pair)
Tony (pair)
Alan (pair)
Tanz (pair)
They are listed on SJs in CORRECTION Stainless Steel, at £35 each. But you'll be paying less and supporting our club.
Following is the first dibs list pending quality control approval. 20 will be available. 10 left and 10 right.
Stu (pair)
Tony (pair)
Alan (pair)
Tanz (pair)
Nothing is fool proof. Fools are clever!
- Hawaiis0
- Senior Poster
- Posts: 4166
- Joined: Sun Jun 30, 2013 18:39
- Model: Excel SA (No 3); Elite 504
- Colour: BRG; Dirty White
- Year: 1986
- Location: West Oxfordshire
Re: Rear seat belt brackets - SS
Have 20 brackets now. 10 left/right. Deposited with Pete so should get to NEC show. Quality control seemed please with them. 4 or 5 pairs allocated.
Nothing is fool proof. Fools are clever!
- Tanz
- Senior Poster
- Posts: 2090
- Joined: Thu May 03, 2007 22:05
- Model: SE
- Colour: Calypso Red
- Year: 1988
- Location: Wolverhampton
Re: Rear seat belt brackets - SS
Hi Stu - I have sent you a PM regarding payment. Hope the PM is working
Cheers, Phil
Never take life seriously, nobody gets out alive anyway!
Never take life seriously, nobody gets out alive anyway!
- MetBlue
- Senior Poster
- Posts: 1445
- Joined: Sat Mar 24, 2018 21:00
- Model: Elite 74 & Excel 92 (SEish))
- Colour: Metalic Blue
- Year: 1974
- Location: Northampton
Re: Rear seat belt brackets - SS
Stu.
I've sent you an email on same.
Tony
I've sent you an email on same.
Tony
What goes together.... Must come apart.
- Hawaiis0
- Senior Poster
- Posts: 4166
- Joined: Sun Jun 30, 2013 18:39
- Model: Excel SA (No 3); Elite 504
- Colour: BRG; Dirty White
- Year: 1986
- Location: West Oxfordshire
Re: Rear seat belt brackets - SS
Replies sent to both of you. Phil yours has landed.
Nothing is fool proof. Fools are clever!