High level brake light
Moderator: Board Moderators
- bash
- Senior Poster
- Posts: 2229
- Joined: Thu Nov 03, 2005 15:34
- Model: Se, V8
- Colour: white
- Year: 1986
- Location: Doncaster
- Contact:
High level brake light
After following a number of Excels on Pete and Pauline Booles Lotus run around the Peaks on LITPs original day, I realised how crap Excels brake lights are, and, the fact that they dont have a central high level brake light was very noticable, so.....
We also own a NC (mk3) Mx5 which has a high level brake light mounted just in front of the rear window which fits the bill perfectly. Rather than upset my wife I bought another one for £20 off the usual internet platform. There are two types of these lights on the NC, one having a longer base than the other but that doesnt matter when you have a dremel in your hand with a cutting disc. I didnt take any pictures when I did it so I'll describe what I did.
The light unit has two mounting bolts underneath it, I cut these off level with the base of the unit, I then made a cardboard template of the gap where I was going to mount it and cut the back off the unit to fit. The lights are LED and it is a sealed unit so cutting it about leaves it open to the elements, so I used body filler to seal it up, sanded and sprayed with Lotus best colour of Monaco white completed that bit. I didnt want to drill any holes in the boot lid so mounting it I used double sided number plate tape, I ran the cable inside the rear spoiler. The spoiler is hollow and has three large drain holes in it. I did drill one small hole, under the foot of one of the spoiler mounts where I ran the cable to inside the boot, sealing the mounts with silicon. The cable is then taped to the underside of the boot, down the hinge, and to the rear brake lights.
It works brilliantly, is cheap as chips and looks like it belongs.
Have fun.
Bash
We also own a NC (mk3) Mx5 which has a high level brake light mounted just in front of the rear window which fits the bill perfectly. Rather than upset my wife I bought another one for £20 off the usual internet platform. There are two types of these lights on the NC, one having a longer base than the other but that doesnt matter when you have a dremel in your hand with a cutting disc. I didnt take any pictures when I did it so I'll describe what I did.
The light unit has two mounting bolts underneath it, I cut these off level with the base of the unit, I then made a cardboard template of the gap where I was going to mount it and cut the back off the unit to fit. The lights are LED and it is a sealed unit so cutting it about leaves it open to the elements, so I used body filler to seal it up, sanded and sprayed with Lotus best colour of Monaco white completed that bit. I didnt want to drill any holes in the boot lid so mounting it I used double sided number plate tape, I ran the cable inside the rear spoiler. The spoiler is hollow and has three large drain holes in it. I did drill one small hole, under the foot of one of the spoiler mounts where I ran the cable to inside the boot, sealing the mounts with silicon. The cable is then taped to the underside of the boot, down the hinge, and to the rear brake lights.
It works brilliantly, is cheap as chips and looks like it belongs.
Have fun.
Bash
Two things are infinite: the universe and human stupidity; and I'm not sure about the universe.
-
- Senior Poster
- Posts: 3733
- Joined: Tue Apr 04, 2006 21:28
- Model: Elite
- Colour: Monaco White
- Year: 1974
- Location: Nottingham
Re: High level brake light
I especially like the "crystal" lens as well - better than red. Good addition Bash. Now you just need to add 400 LEDs to the SD1 light units
- bash
- Senior Poster
- Posts: 2229
- Joined: Thu Nov 03, 2005 15:34
- Model: Se, V8
- Colour: white
- Year: 1986
- Location: Doncaster
- Contact:
Re: High level brake light
I refer you to clint eastwoods most famous quote, "a mans has to know his limitations". However, I do know a man with a 3d printer and an electrical 'bent'. Has anyone got a grotty rear light unit that needs free lodging for a possible prototype ?
Bash
Bash
Two things are infinite: the universe and human stupidity; and I'm not sure about the universe.
- Excel SA
- Senior Poster
- Posts: 515
- Joined: Thu Jul 02, 2020 06:11
- Model: Excel
- Colour: White
- Year: 1987
- Location: Johannesburg, South Africa
Re: High level brake light
There are a good few creative ways to change these lights popping up!
This has been done before - have a look at thishttps://www.thelotusforums.com/forums/t ... ent-912122. Too many wires for me to cope with!
Neil.
This has been done before - have a look at thishttps://www.thelotusforums.com/forums/t ... ent-912122. Too many wires for me to cope with!
Neil.
-
- Senior Poster
- Posts: 3733
- Joined: Tue Apr 04, 2006 21:28
- Model: Elite
- Colour: Monaco White
- Year: 1974
- Location: Nottingham
Re: High level brake light
That's the thread I had in mind!
Pete
Pete
- Tanz
- Senior Poster
- Posts: 2090
- Joined: Thu May 03, 2007 22:05
- Model: SE
- Colour: Calypso Red
- Year: 1988
- Location: Wolverhampton
Re: High level brake light
I think that's the best solution I have seen - nice one Bash!
Cheers, Phil
Never take life seriously, nobody gets out alive anyway!
Never take life seriously, nobody gets out alive anyway!
- Hawaiis0
- Senior Poster
- Posts: 4166
- Joined: Sun Jun 30, 2013 18:39
- Model: Excel SA (No 3); Elite 504
- Colour: BRG; Dirty White
- Year: 1986
- Location: West Oxfordshire
Re: High level brake light
Disagree. My full bar hooker magnet was better
Nothing is fool proof. Fools are clever!
-
- Moderator
- Posts: 2227
- Joined: Wed Feb 06, 2013 15:06
- Model: Elite S2.2 Automatic
- Colour: Essex Blue
- Year: 1981
- Location: Worcestershire
Re: High level brake light
You’ll be wanting progressive indicators like on Audis next!
- bash
- Senior Poster
- Posts: 2229
- Joined: Thu Nov 03, 2005 15:34
- Model: Se, V8
- Colour: white
- Year: 1986
- Location: Doncaster
- Contact:
Re: High level brake light
Funny how facebook groups come up with an idea isnt it, Im sure some of will know what I mean.
Bash
Bash
Two things are infinite: the universe and human stupidity; and I'm not sure about the universe.
- bash
- Senior Poster
- Posts: 2229
- Joined: Thu Nov 03, 2005 15:34
- Model: Se, V8
- Colour: white
- Year: 1986
- Location: Doncaster
- Contact:
Re: High level brake light
Ditto again,........
Two things are infinite: the universe and human stupidity; and I'm not sure about the universe.
- Lotus-e-Clan
- Senior Poster
- Posts: 4463
- Joined: Thu Nov 30, 2006 13:25
- Model: Excel SE - EWP/Waterless!
- Colour: Not Blue or Green
- Year: 1989
- Location: Swaledale
Re: High level brake light
I guess someone has nicked your idea Bash?
To be fair, only honest people and academics quote their sources... and although it is rare, I've experienced mildly-dishonest academics pinching stuff off the net (esp Wiki) and using it unquoted within their lectures (students are the first to spot it mind you) that's why I tend to separate the two terms ... hahaha
So expect your original ideas to get pinched and not get referenced back to you Bash.
Pretty sure over the years, some of the ideas I've had about car stuff (here, and on the Imp forum) have been 'absorbed by osmosis' by other helpful posters and presented as their own original thinking.
That's OK because imitation is the sincerest form of flattery Bash, so lap it up! Similarly, telling what you know is an original joke and then hearing it back months, or years, later, is quietly satisfying too.
Peter K
- bash
- Senior Poster
- Posts: 2229
- Joined: Thu Nov 03, 2005 15:34
- Model: Se, V8
- Colour: white
- Year: 1986
- Location: Doncaster
- Contact:
Re: High level brake light
You are right Peter, it was more of a dig at Facebook generally and the fact that people cant be bothered to do any research so everything is 'new' to them. Thats why forums are so good, the info is there for those that can be bothered to look.
Bash
Ps, why did the chicken cross the road ?
Pps, I think having a third light is a good thing so the more mx5 lights the better (other products are svailable)
Ppps, because kfc was on the chickens side
Bash
Ps, why did the chicken cross the road ?
Pps, I think having a third light is a good thing so the more mx5 lights the better (other products are svailable)
Ppps, because kfc was on the chickens side
Two things are infinite: the universe and human stupidity; and I'm not sure about the universe.
- Lotus-e-Clan
- Senior Poster
- Posts: 4463
- Joined: Thu Nov 30, 2006 13:25
- Model: Excel SE - EWP/Waterless!
- Colour: Not Blue or Green
- Year: 1989
- Location: Swaledale
Re: High level brake light
That's an original joke ...
so is this ...
Why do rams and goats like dairy food?
'cos they're butters.
OK, I don't expect to hear that one back anytime soon! At least my 7 yo granddaughter laughed, once she'd 'got it'.
so is this ...
Why do rams and goats like dairy food?
'cos they're butters.
OK, I don't expect to hear that one back anytime soon! At least my 7 yo granddaughter laughed, once she'd 'got it'.
Peter K
-
- Junior Poster
- Posts: 61
- Joined: Tue Mar 28, 2023 17:23
- Model: Lotus Excel SE
- Colour: White
- Year: 1987
Re: High level brake light
I just added a 3rd brake light today. How can I add pictures. It is a different light which I really like.
-
- Junior Poster
- Posts: 61
- Joined: Tue Mar 28, 2023 17:23
- Model: Lotus Excel SE
- Colour: White
- Year: 1987
Re: High level brake light
I just added a 3rd brake light today. How can I add pictures. It is a different light which I really like.