Threads in head for cam carriers stripped

This forum is specifically for engine and gearbox posts, please try to keep on topic in any thread to make things easy to find

Moderator: Board Moderators

Post Reply
Zaphod
Senior Poster
Posts: 242
Joined: Mon Aug 23, 2021 21:38
Model: Excel SE
Colour: Blue
Year: 1990
Location: Uffington

Threads in head for cam carriers stripped

Post by Zaphod »

I now have my cam clearances set. However while doing so noticed 2 damaged threads in the head for the carrier bolts. These appear to be M8 threads and I have some M8 helicoils and the tap for them but the drill but has gone walkaboit :( but it seems to be an 8.3mm drill? But are there any issues with helicoils for this purpose? (I’m not sure if they are too long)
Of all the things I have lost I think I miss my mind the most...

1952 MG TD
1957 MGA 1500
1959 Austin Healey Sprite
1975 MG Midget 1500
1990 Lotus Excel

AndyC
Senior Poster
Posts: 2196
Joined: Tue Nov 01, 2005 20:01
Model: SE x2 + Celebration x2
Colour: Gold,blue and green
Year: 1987
Location: Norwich

Re: Threads in head for cam carriers stripped

Post by AndyC »

Helicoils are the go-to solution to this 9all too common) problem.

Zaphod
Senior Poster
Posts: 242
Joined: Mon Aug 23, 2021 21:38
Model: Excel SE
Colour: Blue
Year: 1990
Location: Uffington

Re: Threads in head for cam carriers stripped

Post by Zaphod »

I guessed it was common, the manual does not help. My feeling it that each time you take the carriers the tension in the valve spring pulls the last section of the threads out, I have a feeling that’s why the studs are there at each end to try and avoid this
Of all the things I have lost I think I miss my mind the most...

1952 MG TD
1957 MGA 1500
1959 Austin Healey Sprite
1975 MG Midget 1500
1990 Lotus Excel

Pete Boole
Senior Poster
Posts: 3711
Joined: Tue Apr 04, 2006 21:28
Model: Elite
Colour: Monaco White
Year: 1974
Location: Nottingham

Re: Threads in head for cam carriers stripped

Post by Pete Boole »

Yep - 8.3mm for M8 Helicoil. 1.5D insert is the longest you can get in - 2D leaves a thread hanging out.

Pete

User avatar
bash
Senior Poster
Posts: 2210
Joined: Thu Nov 03, 2005 15:34
Model: Se, V8
Colour: white
Year: 1986
Location: Doncaster
Contact:

Re: Threads in head for cam carriers stripped

Post by bash »

Its very common, I did all mine with helicoils because they are stronger than the standard thread.
Bash
Two things are infinite: the universe and human stupidity; and I'm not sure about the universe.

User avatar
rbgosling
Senior Poster
Posts: 1702
Joined: Sun Jul 04, 2010 22:55
Model: Lotus Excel SE
Colour: Midnight Blue
Year: 1990
Location: Rugby

Re: Threads in head for cam carriers stripped

Post by rbgosling »

A little secret - quite a few components in the Mercedes F1 engine are helicoiled from new, as standard, because it's better than cutting a thread in the Aluminium. Especially for the smaller threads. Once I learned that I never needed to feel again like a helicoil was a bodge, it can now be considered an enhancement!
"Farmer" Richard

1990 Lotus Excel SE (Lilith)
2022 MG MG5 EV (not due to be a classic for quite a few years...)
2011 Nissan Leaf (Ragly - EV pioneer, must be due to be a classic one day)

User avatar
MetBlue
Senior Poster
Posts: 1401
Joined: Sat Mar 24, 2018 21:00
Model: Elite 74 & Excel 92 (SEish))
Colour: Metalic Blue
Year: 1974
Location: Northampton

Re: Threads in head for cam carriers stripped

Post by MetBlue »

Interesting.
Makes slot of sense when you think about it, as you say, especially on smaller threads.
Tony
What goes together.... Must come apart.

User avatar
Lotus-e-Clan
Senior Poster
Posts: 4454
Joined: Thu Nov 30, 2006 13:25
Model: Excel SE - EWP/Waterless!
Colour: Not Blue or Green
Year: 1989
Location: Swaledale

Re: Threads in head for cam carriers stripped

Post by Lotus-e-Clan »

rbgosling wrote:
Mon May 02, 2022 08:42
A little secret - quite a few components in the Mercedes F1 engine are helicoiled from new, as standard, because it's better than cutting a thread in the Aluminium. Especially for the smaller threads. Once I learned that I never needed to feel again like a helicoil was a bodge, it can now be considered an enhancement!
I seem to recall Honda did this too as std ? Maybe some bike engine /grearbox threads?

Done this on the imp race engine since 1970s. My 1965 Imp WSM refers to the use of Helicoiled threads. The SMART Roadster sump threads are all heli-coiled too (SMART engine alloy is made from cheese!). No way a bodge! :D
Peter K

User avatar
barker_001
Senior Poster
Posts: 905
Joined: Mon May 07, 2007 19:50
Model: Excel SE
Colour: Calypso Red
Year: 1990
Location: Cardiff, South Wales

Re: Threads in head for cam carriers stripped

Post by barker_001 »

rbgosling wrote:
Mon May 02, 2022 08:42
A little secret - quite a few components in the Mercedes F1 engine are helicoiled from new, as standard, because it's better than cutting a thread in the Aluminium. Especially for the smaller threads. Once I learned that I never needed to feel again like a helicoil was a bodge, it can now be considered an enhancement!
This is common practice in the aviation industry too, for aluminium castings.
Bryan

1990 Excel SE

"Look, there's a Ferrari..."

Marten
Regular Poster
Posts: 127
Joined: Tue Aug 10, 2021 20:38
Model: excel
Colour: red
Year: 1985
Location: NL
Contact:

Re: Threads in head for cam carriers stripped

Post by Marten »

barker_001 wrote:
Sun May 08, 2022 20:18
rbgosling wrote:
Mon May 02, 2022 08:42
A little secret - quite a few components in the Mercedes F1 engine are helicoiled from new, as standard, because it's better than cutting a thread in the Aluminium. Especially for the smaller threads. Once I learned that I never needed to feel again like a helicoil was a bodge, it can now be considered an enhancement!
This is common practice in the aviation industry too, for aluminium castings.
Aluminium galls easily so it is a poor thread material. Steel (as in a Helicoil ) is much better and more durable so you see them in parts which see a lot of wrenching. Also the Helicoil has a larger surface area (larger OD) so you engage more aluminium, so that makes it stronger

User avatar
rbgosling
Senior Poster
Posts: 1702
Joined: Sun Jul 04, 2010 22:55
Model: Lotus Excel SE
Colour: Midnight Blue
Year: 1990
Location: Rugby

Re: Threads in head for cam carriers stripped

Post by rbgosling »

One thing to watch for (don't ask how I know :wink: ) - if you use pre-applied threadlock, if you then try to unscrew it you can end up unscrewing the helicoil from the aluminium, rather the screw from the helicoil. Something that is not fixable if someone doesn't have a helicoil kit at the track with them...
"Farmer" Richard

1990 Lotus Excel SE (Lilith)
2022 MG MG5 EV (not due to be a classic for quite a few years...)
2011 Nissan Leaf (Ragly - EV pioneer, must be due to be a classic one day)

Post Reply