Fuel pump thread
Moderator: Board Moderators
- rbgosling
- Senior Poster
- Posts: 1702
- Joined: Sun Jul 04, 2010 22:55
- Model: Lotus Excel SE
- Colour: Midnight Blue
- Year: 1990
- Location: Rugby
Fuel pump thread
Does anyone know what the thread size is for the hoses in/out of the fuel pump? I’ve bought an aftermarket pump and need to source some adaptors to connect it up. I’ve already managed to buy the wrong ones once (right for the pump, wrong for the hoses) so don’t want to make the same mistake again!
"Farmer" Richard
1990 Lotus Excel SE (Lilith)
2022 MG MG5 EV (not due to be a classic for quite a few years...)
2011 Nissan Leaf (Ragly - EV pioneer, must be due to be a classic one day)
1990 Lotus Excel SE (Lilith)
2022 MG MG5 EV (not due to be a classic for quite a few years...)
2011 Nissan Leaf (Ragly - EV pioneer, must be due to be a classic one day)
- Hawaiis0
- Senior Poster
- Posts: 4130
- Joined: Sun Jun 30, 2013 18:39
- Model: Excel SA (No 3); Elite 504
- Colour: BRG; Dirty White
- Year: 1986
- Location: West Oxfordshire
Re: Fuel pump thread
Scan the threads Richard - same asked a couple of months ago
Nothing is fool proof. Fools are clever!
- rbgosling
- Senior Poster
- Posts: 1702
- Joined: Sun Jul 04, 2010 22:55
- Model: Lotus Excel SE
- Colour: Midnight Blue
- Year: 1990
- Location: Rugby
Re: Fuel pump thread
Found it - Thanks!
1/4” BSP apparently - I’d managed to order 3/8” BSP, which explains why they were a little on the big side.
1/4” BSP apparently - I’d managed to order 3/8” BSP, which explains why they were a little on the big side.
"Farmer" Richard
1990 Lotus Excel SE (Lilith)
2022 MG MG5 EV (not due to be a classic for quite a few years...)
2011 Nissan Leaf (Ragly - EV pioneer, must be due to be a classic one day)
1990 Lotus Excel SE (Lilith)
2022 MG MG5 EV (not due to be a classic for quite a few years...)
2011 Nissan Leaf (Ragly - EV pioneer, must be due to be a classic one day)