What is the expected life of wheel paint?
I had mine redone 5 years ago and now they are flaking in chunks.
Is that a sign of a poor job?
Wheel Paint
Moderator: Board Moderators
- Hawaiis0
- Senior Poster
- Posts: 4153
- Joined: Sun Jun 30, 2013 18:39
- Model: Excel SA (No 3); Elite 504
- Colour: BRG; Dirty White
- Year: 1986
- Location: West Oxfordshire
Wheel Paint
Nothing is fool proof. Fools are clever!
- barker_001
- Senior Poster
- Posts: 907
- Joined: Mon May 07, 2007 19:50
- Model: Excel SE
- Colour: Calypso Red
- Year: 1990
- Location: Cardiff, South Wales
Re: Wheel Paint
I think it is a case of YMMV, but I would have expected more than 5 years. Mine were professionally painted and lasted about 8 years before corrosion started to get under the paint. The tyre valves and the hubs were the worst affected area, and once it started the deterioration was rapid. I've now had them powder coated after a full strip back to bare metal, so I'm hoping for at least the same again. The guy that powder coated them (Tony at Perfectadent in Bridgend) said that apart from kerbing damage (of which there was none in my case), damage to the hubs was the most common and is caused by careless tyre fitters when they slide the hubs on and off the balancing machine.
So I will only ever be having tyres fitted and balanced by Tony. I was sure that I had picked up a buckle in one or more of the wheels because I had a wheel wobble that, despite several attempts at balancing, wouldn't go away. However when he refurbed the wheels he checked them for trueness, and said the worst was less than 1mm out. He followed the Lotus balancing instructions and as a result I have zero wobble. And of course he was careful fitting them onto the balancing machine...
So I will only ever be having tyres fitted and balanced by Tony. I was sure that I had picked up a buckle in one or more of the wheels because I had a wheel wobble that, despite several attempts at balancing, wouldn't go away. However when he refurbed the wheels he checked them for trueness, and said the worst was less than 1mm out. He followed the Lotus balancing instructions and as a result I have zero wobble. And of course he was careful fitting them onto the balancing machine...
Bryan
1990 Excel SE
"Look, there's a Ferrari..."
1990 Excel SE
"Look, there's a Ferrari..."
-
- Senior Poster
- Posts: 1689
- Joined: Sat Jun 16, 2007 23:20
- Model: Excel SE
- Year: 1992
- Location: Newcastle Upon Tyne, England
Re: Wheel Paint
Were your wheels painted or power coated ?
Personal experience has led me to be no fan of powder coating. I'm sure it's used only because it's a lot easier and cheaper to apply than actual paint.
Personal experience has led me to be no fan of powder coating. I'm sure it's used only because it's a lot easier and cheaper to apply than actual paint.
Last edited by KevW on Tue Nov 10, 2020 10:55, edited 1 time in total.
Kev W no.282
-
- Senior Poster
- Posts: 3722
- Joined: Tue Apr 04, 2006 21:28
- Model: Elite
- Colour: Monaco White
- Year: 1974
- Location: Nottingham
Re: Wheel Paint
I prefer paint to powder coating as well. Once there is the tiniest chip in the powder coat water seems to get under it very quickly. This can happen without you notice it at first and suddenly you've got a lot of corrosion.
Pete
Pete
- Hawaiis0
- Senior Poster
- Posts: 4153
- Joined: Sun Jun 30, 2013 18:39
- Model: Excel SA (No 3); Elite 504
- Colour: BRG; Dirty White
- Year: 1986
- Location: West Oxfordshire
Re: Wheel Paint
Powder coated.
It was a rushed job at the time as the spray machine broke down during my visit and I dont know if that led to a poorer finish.
So paint is better than powder? What is the OEM process used?
It was a rushed job at the time as the spray machine broke down during my visit and I dont know if that led to a poorer finish.
So paint is better than powder? What is the OEM process used?
Nothing is fool proof. Fools are clever!
-
- Senior Poster
- Posts: 3722
- Joined: Tue Apr 04, 2006 21:28
- Model: Elite
- Colour: Monaco White
- Year: 1974
- Location: Nottingham
Re: Wheel Paint
What is vital is that an etch primer is used on aluminium - but they should know that. Given the smoothness of the OEM finish I would think it would be paint. Powder coating leaves a slightly more irregular surface finish. Don't paint the hub-mounting area!
Pete
Pete
- CID
- Junior Poster
- Posts: 77
- Joined: Mon Apr 29, 2013 20:15
- Model: Excel SE
- Colour: White
- Year: 1988
- Location: Belgium
Re: Wheel Paint
I'm also in the process of painting my rims.
Will be by paint.
Does somebody know the official paintcode for the wheels?
Thanks....
Regards Curt
Will be by paint.
Does somebody know the official paintcode for the wheels?
Thanks....
Regards Curt
-
- Senior Poster
- Posts: 1689
- Joined: Sat Jun 16, 2007 23:20
- Model: Excel SE
- Year: 1992
- Location: Newcastle Upon Tyne, England
Re: Wheel Paint
Four years ago I repainted my Excel's OZ wheels using an Etech paint kit
See this link viewtopic.php?f=17&t=9333&p=69617&hilit=wheel#p69617
See this link viewtopic.php?f=17&t=9333&p=69617&hilit=wheel#p69617
Kev W no.282
-
- Verified Poster
- Posts: 13
- Joined: Fri Sep 08, 2017 09:32
- Model: Excel SE
- Colour: Red
- Year: 1990
Re: Wheel Paint
I used an Etech kit 18 months ago, - highly recommended, - had enough left to refinish the coolant tank!