Seat sewing machine advice needed!
Moderator: Board Moderators
- Grant H
- Regular Poster
- Posts: 128
- Joined: Wed Sep 11, 2013 21:38
- Model: Excel
- Colour: Glacier Blue
- Year: 1985
- Location: Sussex
Re: Seat sewing machine advice needed!
Hi Richard, has your wife been experimenting with needles such as the denim or leather types at all? There is also the tricks of putting news paper under difficult materials (it can be torn off afterwards) or turning it upside down. Try also experimenting with the presser foot pressure. I think an industrial machine was a bit overkill and its not like the feed dogs are any different, unless you are after the walking foot type. The motor is on all the time and the pedal operates the clutch, bit like a car. Ideal if you are at it all day but not needed for a few meters run. If the plastic machine is not stuck on the first hole then it's probably up to the job, you just need to find the best method to sew through spongy foam. Good luck.
- MetBlue
- Senior Poster
- Posts: 1421
- Joined: Sat Mar 24, 2018 21:00
- Model: Elite 74 & Excel 92 (SEish))
- Colour: Metalic Blue
- Year: 1974
- Location: Northampton
Re: Seat sewing machine advice needed!
Richard
I've got and replied to your message, but not sure if it sent. Also sent you an email.
I'm still interested.
Tony
I've got and replied to your message, but not sure if it sent. Also sent you an email.
I'm still interested.
Tony
What goes together.... Must come apart.
- rbgosling
- Senior Poster
- Posts: 1719
- Joined: Sun Jul 04, 2010 22:55
- Model: Lotus Excel SE
- Colour: Midnight Blue
- Year: 1990
- Location: Rugby
Re: Seat sewing machine advice needed!
Got the message Tony, I'll keep an eye on that machine and see if it's going for a reasonable price...
"Farmer" Richard
1990 Lotus Excel SE (Lilith)
2022 MG MG5 EV (not due to be a classic for quite a few years...)
2011 Nissan Leaf (Ragly - EV pioneer, must be due to be a classic one day)
1990 Lotus Excel SE (Lilith)
2022 MG MG5 EV (not due to be a classic for quite a few years...)
2011 Nissan Leaf (Ragly - EV pioneer, must be due to be a classic one day)
- bash
- Senior Poster
- Posts: 2222
- Joined: Thu Nov 03, 2005 15:34
- Model: Se, V8
- Colour: white
- Year: 1986
- Location: Doncaster
- Contact:
Re: Seat sewing machine advice needed!
Two things are infinite: the universe and human stupidity; and I'm not sure about the universe.
- rbgosling
- Senior Poster
- Posts: 1719
- Joined: Sun Jul 04, 2010 22:55
- Model: Lotus Excel SE
- Colour: Midnight Blue
- Year: 1990
- Location: Rugby
Re: Seat sewing machine advice needed!
Well, I eventually accepted that the budget I'd aimed for was never going to get what I wanted, so I upped the budget (on the assumption that these seem to sell easily so I should get my money back when the project is done!), and splashed out £380 on this:
A Singer 431 T200A, industrial machine with walking foot. No idea how old it is, but it weighs a ton and consists of some seriously sturdy machinery, a MASSIVE motor, and some very pleasing oiling points.
We'll see soon how much difference it makes to the seat sewing project - we're under way again!
A Singer 431 T200A, industrial machine with walking foot. No idea how old it is, but it weighs a ton and consists of some seriously sturdy machinery, a MASSIVE motor, and some very pleasing oiling points.
We'll see soon how much difference it makes to the seat sewing project - we're under way again!
"Farmer" Richard
1990 Lotus Excel SE (Lilith)
2022 MG MG5 EV (not due to be a classic for quite a few years...)
2011 Nissan Leaf (Ragly - EV pioneer, must be due to be a classic one day)
1990 Lotus Excel SE (Lilith)
2022 MG MG5 EV (not due to be a classic for quite a few years...)
2011 Nissan Leaf (Ragly - EV pioneer, must be due to be a classic one day)
-
- Senior Poster
- Posts: 3720
- Joined: Tue Apr 04, 2006 21:28
- Model: Elite
- Colour: Monaco White
- Year: 1974
- Location: Nottingham
Re: Seat sewing machine advice needed!
Looking forward to seeing the results!
Pete
Pete
-
- Moderator
- Posts: 2226
- Joined: Wed Feb 06, 2013 15:06
- Model: Elite S2.2 Automatic
- Colour: Essex Blue
- Year: 1981
- Location: Worcestershire
Re: Seat sewing machine advice needed!
Does that mean it’ll be too heavy to bring to the restoration show?!rbgosling wrote: ↑Mon Nov 02, 2020 17:26Well, I eventually accepted that the budget I'd aimed for was never going to get what I wanted, so I upped the budget (on the assumption that these seem to sell easily so I should get my money back when the project is done!), and splashed out £380 on this:
A Singer 431 T200A, industrial machine with walking foot. No idea how old it is, but it weighs a ton and consists of some seriously sturdy machinery, a MASSIVE motor, and some very pleasing oiling points.
We'll see soon how much difference it makes to the seat sewing project - we're under way again!
It probably uses too much power.....
Richard
- rbgosling
- Senior Poster
- Posts: 1719
- Joined: Sun Jul 04, 2010 22:55
- Model: Lotus Excel SE
- Colour: Midnight Blue
- Year: 1990
- Location: Rugby
Re: Seat sewing machine advice needed!
IF the restoration show goes ahead (and if we have somewhere to plug the machine in) I'd be happy to bring it! It fits in my wife's X-type, as proved yesterday, so that can be done. I do remember watching with interest a couple of years back when someone on the Jowett stand next to us was sewing some seats.
I'd hope I'd be finished with my seats by then! If not, that's down to whether my wife Heather fancies doing some work at the show, she's the seamstress rather than me, unless I decide to pick up the skill between now and then. Or I know Tony (MetBlue) in Northampton was planning on some upholstery work, so maybe he would?
I'd hope I'd be finished with my seats by then! If not, that's down to whether my wife Heather fancies doing some work at the show, she's the seamstress rather than me, unless I decide to pick up the skill between now and then. Or I know Tony (MetBlue) in Northampton was planning on some upholstery work, so maybe he would?
"Farmer" Richard
1990 Lotus Excel SE (Lilith)
2022 MG MG5 EV (not due to be a classic for quite a few years...)
2011 Nissan Leaf (Ragly - EV pioneer, must be due to be a classic one day)
1990 Lotus Excel SE (Lilith)
2022 MG MG5 EV (not due to be a classic for quite a few years...)
2011 Nissan Leaf (Ragly - EV pioneer, must be due to be a classic one day)
- Hawaiis0
- Senior Poster
- Posts: 4146
- Joined: Sun Jun 30, 2013 18:39
- Model: Excel SA (No 3); Elite 504
- Colour: BRG; Dirty White
- Year: 1986
- Location: West Oxfordshire
Re: Seat sewing machine advice needed!
Couldn't a trimmer re-do the whole car for £380?
Nothing is fool proof. Fools are clever!
- rbgosling
- Senior Poster
- Posts: 1719
- Joined: Sun Jul 04, 2010 22:55
- Model: Lotus Excel SE
- Colour: Midnight Blue
- Year: 1990
- Location: Rugby
Re: Seat sewing machine advice needed!
Ummm... probably not. Not that I've looked into the cost, to be fair, so I don't really know. And in any case, at the end of this I will have a sewing machine that I hope to sell for at least what I bought it for, so all it will have cost me is the fabric and cotton (and the goodwill of my lovely wife Heather).
"Farmer" Richard
1990 Lotus Excel SE (Lilith)
2022 MG MG5 EV (not due to be a classic for quite a few years...)
2011 Nissan Leaf (Ragly - EV pioneer, must be due to be a classic one day)
1990 Lotus Excel SE (Lilith)
2022 MG MG5 EV (not due to be a classic for quite a few years...)
2011 Nissan Leaf (Ragly - EV pioneer, must be due to be a classic one day)