Page 2 of 3

Re: Elite boot lid "Push Here To Close" label

Posted: Wed Mar 18, 2020 09:13
by MetBlue
Took some searching, but the font looks like it's called "Jackson Mn Regular". Found it on fontsgeek.com, but struggling to download it !!
Thanks to KKV for providing the direction ( Sorry, don't know your name).
Have passed info to Isaydingdong, so waiting on reply. Looking promising. They said they could have recreated my approximation if needed for a relatively small cost. With the right font, should be a walk in the park for them.
I will PM those who have expressed interest with my correct email address ( the one used for this site is no longer active, and I'm using a gmail account, which as we know, has it's limitations on the forum.

Team work is dream work....

Re: Elite boot lid "Push Here To Close" label

Posted: Wed Mar 18, 2020 14:43
by kkv444v
It might also be worth contacting Dan at divinehandcraft.co.uk as he is a Lotus owner who does stickers (well-known on other Lotus forums). I should have mentioned him yesterday!

Re: Elite boot lid "Push Here To Close" label

Posted: Mon Mar 23, 2020 22:32
by MetBlue
Progress update.
Dingdong have confirmed they can produce a silver sticker with correct black Jackson Mn font. They will be sticky on the back, so will need to stick to the stricker or the stricker cover, but I don't see this as a problem. They could produce a window sticker, sticky side on the front, but this would have to be grey background (They actually said a silver background window sticker was not impossible, but it would be SIGNIFICANTLY more expensive).
So unless someone on the forum can see a problem I've missed with a silver sticker, stick on rear, that's what I'm proposing to go with.

So who's in on a group buy? Price will depend on qty, but it will be no more than £6 worst case. I hope it will be down to £5. By my count there are 4 people in the above chain who've shown interest, plus me. I've emailed you all, but so far only have replies from two (Maybe I'm not the only one whose now using a different email address to that registered with the site).
Post here or reply to earlier email all those who are wanting a sticker or 2.

Tony

Re: Elite boot lid "Push Here To Close" label

Posted: Tue Mar 24, 2020 09:15
by RED BARON
At that price if I was you I'd buy two and have a spare. I would stick it on the outside as it probably will last quite a long time
because how often are you going to press on it? At least it would look the same as the old one.

Ian.

Re: Elite boot lid "Push Here To Close" label

Posted: Tue Mar 24, 2020 19:31
by Emmerg
I will have a couple please

Thanks for organising

Guy

Re: Elite boot lid "Push Here To Close" label

Posted: Tue Mar 24, 2020 20:54
by theelanman
sort of still with this topic.....
I'll have a couple but also....does anyone want the Valvoline Oil sticker from the engine bay?
all I need to know is how big they are.....and ding dong would do them for a £5er too......
might be worth seeing if theyd do a bundle....lol
just thought Id mention it
cheers
G

ps yeah stick me down for 2 of the 'push here' decals

Re: Elite boot lid "Push Here To Close" label

Posted: Thu Mar 26, 2020 00:35
by MetBlue
Ready to get an order placed.
So far I have following requests:
Pete B 1 off
Emmerg ( Guy) 2 off
theelanman 2 off
Don't be foolish 1 off
Red Baron 2 off
TAR (Tim) 3 off
and I'll maybe get 2 or 3 for myself , so about 15 should cover it. Could I ask you all to confirm to my gmail account ( you should have an email from me providing it).
Anyone not listed above, this is your final call.

Tony

Re: Elite boot lid "Push Here To Close" label

Posted: Thu Mar 26, 2020 00:38
by MetBlue
....does anyone want the Valvoline Oil sticker from the engine bay?
all I need to know is how big they are.
I don't know of this sticker in the engine bay. Not sure mine had one. Anyone got a photo?

Tony

Re: Elite boot lid "Push Here To Close" label

Posted: Thu Mar 26, 2020 08:05
by Pete Boole
Can you change mine to 2 stickers please Tony. Thanks

Pete

Re: Elite boot lid "Push Here To Close" label

Posted: Thu Mar 26, 2020 09:13
by RED BARON
Tony. I see my name RED BARON on your list is that correct? I don't have an Elite, so don't need it . I only have a Excel,
I was only telling you the place you could possibly get them made, and advising you to get more than one for yourself.
As I had "DO NOT JACK" stickers on clear background ( they sent six) made for myself.

Ian.

Re: Elite boot lid "Push Here To Close" label

Posted: Thu Mar 26, 2020 09:57
by MetBlue
RB. Sorry, misread your post. Removed from list and Pete's updated to 2.
Tony

Re: Elite boot lid "Push Here To Close" label

Posted: Thu Mar 26, 2020 09:57
by MetBlue
RB. Sorry, misread your post. Removed from list and Pete's updated to 2.
Tony

Re: Elite boot lid "Push Here To Close" label

Posted: Thu Mar 26, 2020 12:32
by theelanman
MetBlue wrote:
....does anyone want the Valvoline Oil sticker from the engine bay?
all I need to know is how big they are.
I don't know of this sticker in the engine bay. Not sure mine had one. Anyone got a photo?

Tony

Image

Re: Elite boot lid "Push Here To Close" label

Posted: Sat Mar 28, 2020 18:24
by kkv444v
You can still buy the Valvoline one, can't you? I am sure I have seen them for sale at one of the specialists.

An example:
https://www.thelotuscentreonline.co.uk/ ... cale=en_GB

Re: Elite boot lid "Push Here To Close" label

Posted: Sat Mar 28, 2020 21:08
by theelanman
Yes you can still buy them.......
It seems they have doubled in price........
So I asked isaydingdong....and they said they could do them for £5 (Tthe original price of the others) if we knew the size of them......
Ì never want to pay a revised price especially when it's more than double........£4.77 original........now £10 + vat........mmmm