The Lotus Grand Tourers

One more stat for those out there who don't know what your left leg is for : 22 SA's in MY86 and 5 SA's in MY89 Excels. Tony, Curve ball, my Nov 86 SA (no 3) is I believe an MY 87! I need to break the MY 86 data down into at least 1 more group. Currently it has everything between MY86 & MY 89 so is...

I'm looking for power curves ( torque and HP) for the late 2.2 HC engine ( Spec 10 ) but can't find anything. The only thing I found looked so linear and perfect it couldn't be correct and said something about an approximation ( automobile-catalog.com) I have a curve from my engine taken about 8 yea...

Some great information in that post Tim. Thanks. Seems the AB14 gets blamed for a lot of issues, but generally they do seem quite reliable. Great to know whats inside though and how easy a reconditioning could be. So it is easy to find by search, the info really needs to be under a title " AB 14 rec...

Just looked at a couple of logo shirts I have and it's common for the logo to sit quite high. - bottom of logo in line with bottom of buttons.

I'd be quite happy either lotus badge top or bottom. Agree www is not critical if it makes things easier.

I like the web lettering and think it should stay but think the logo is sitting too high on the latest picture posted. ESPRIT can't go any lower I agree, but how about dropping the lotus logo to the bottom, so creating an upside down triangle ? As pointed out, ESPRIT is "worst" case. Other variants ...

Have you a route to order sorted yet Stu?

Tony

My guess Is these F pipes, although 'new' were manufactured MANY years ago and have been on a shelf. Material has started to degrade, hence not really fit for purpose any more. I have the same set up as Bryan, which cost pennies and lasts for ever. Bit of a dilemma though if your seeking total origi...

My car has Nylock nuts and don't need to be over tight.
I just put an 8mm socket on a 1/4 " UJ, then a screw driver handle drive. Being Nylock, hand tight is plenty.

Tony

“Teddy bear” fabric

If you'd posted that last Monday I wouldn't have took it seriously.

Not sure I've seen it. Anyone got a photo?

Been thinking. If it was the starter motor, why wasn't the gear thrown out to the fly wheel? Unless I have two problems?

An intermittent issue today. Cold start, bit reluctant to fire. Holding key in crank position for maybe 5 seconds, but when key released, I could still hear a motor running in engine bay. Engine not yet running, and not being cranked, just a motor running. I THINK it was the starter motor. Switched ...

BBQ, Pootle and Classic looks a perfect triple.
All signed up.

Can't help on the vac advance unit, but check the hall effect pick up wire closely and also the nylon castlation widget that drives the vac plate.
The wire particularly gave me much grief for many months (years) until I eventually replaced with new. Intermittent break in the wire.

Thanks Phil. 7:00 is a good time for me.
Tony

Good News / Bad News. Bad news : offered Pete's recently produced lower grill up yesterday. Thanks to Lotus quality control, "Houston - we have a slight problem". https://www.dropbox.com/scl/fi/xl13g48wduzhsca77zfvc/Grill.jpg?rlkey=s405fwlgetae5p3loaf48s4va&raw=1 Best part of 15mm longer than the av...